EasyManuals Logo
Home>RCA>VCR>VR603AHF

RCA VR603AHF User Manual

RCA VR603AHF
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
20
Recording a Program
Your VCR provides different recording features. These features are explained in the following sections.
Recording Speeds
Press SPEED on the remote to select a recording speed (SP, LP, or SLP). The speed you select appears on
the TV screen.
SP (Standard Play) gives the best quality recording. That is why most
prerecorded, rental tapes are recorded in SP. Fewer programs can be recorded
on the tape. Special effects such as pause, frame advance, slow motion, and
picture search work well in this speed.
LP (Long Play) gives twice the recording time of tapes recorded in SP.
SLP (Super Long Play) gives three times the recording time of tapes recorded
in SP. Special effects such as pause, frame advance, slow motion, and picture
search work well in this speed.
Recording Pause
This feature lets you prevent recording short passages of unwanted material.
Press PAUSE during recording to stop and start recording.
The VCR automatically switches from pause to stop after a few minutes.
Basic Recording – Operating Instructions
To make a recording
Turn on the TV and tune it to the VCR viewing channel, either 3, 4, or the TV’s video input channel.
1. Insert a tape with its safety tab in place.
2. If you are using one of the basic hookups, make sure the VCR indicator
appears in the VCR’s display panel. If not, press TV•VCR to turn it on.
3. Use SPEED on the remote to select a recording speed. The tape speed
indicator appears on the TV screen.
4. Select the channel to be recorded. The channel number appears on the TV
screen.
5. Press RECORD and PLAY at the same time on the VCR or REC on the
remote to begin recording. The RECORD indicator appears in the VCR’s
display panel while the VCR is recording.
Watch a TV channel while VCR is recording a different channel
1. Follow steps 1 through 5 above.
2. If you are using one of the basic hookups, press TV•VCR to switch to the
TV channel. The VCR indicator turns off in the display panel.
3. Select the channel you want to watch with the TV’s channel buttons.
4. Press STOP•EJECT on the VCR or STOP on the remote when the
recording is finished.
Types of Recordings
Recording Time
Cassette SP LP SLP
T-120 2Hr 4Hr 6Hr
T-160 2Hr 40Min 5Hr 20Min 8Hr

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RCA VR603AHF and is the answer not in the manual?

RCA VR603AHF Specifications

General IconGeneral
BrandRCA
ModelVR603AHF
CategoryVCR
LanguageEnglish

Related product manuals