VCR Features
Chapter 4 41
On-Screen Displays
Pressing the INFO button displays the status of the VCR (Stop, Play Record,
etc.) as well as the channel number, time counter position, date, time, and tape
speed on the TV screen.
Note: The date and time must be set before they can be displayed.
1. Press the INFO button to show the on-screen displays. The current time is
displayed in the VCR’s front panel.
2. Press INFO again to have only the time counter remain on the screen. The
time counter is also displayed in the VCR’s front panel.
3. Press INFO again to have no displays appear on the TV screen. The time
counter remains in the VCR’s display panel. This is useful for dubbing
tapes.
4. Press the INFO button again to return to the normal display. The current
time is displayed in the VCR’s display panel.
Note: Turning off the VCR also resets the displays.
No displays will appear (useful
for dubbing)
0:30:00
2
3
Time counter only (does not
time out)
Stop Ch 05 0:30:00
11/18/01 Sun 1:30PM SLP
1
On-screen display (times out)
To Next Page
Loading...
Need help?
General
