RECORDING
If you want to record something that you're watching, you
can use basic recording. For more detailed information,
refer to the "Recording" section starting on the next page.
1. Set the tape speed by pressing TAPE SPEED on the VCR
(SPEED on the remote).
.
3.
Press the RECORD button to begin recording.
Press STOP to stop recording.
If you just want to pause the recording for a short time
(such as during a commercial), press PAUSE instead of
STOR
• For more information about in-depth recording
features, refer to the next section.
CH ECK TH E SAFETY TAB
No matter which recording option you use, you need to
make sure there is a tape in the VCR, and that the tape's
safety tab is in place. You cannot record on a tape with the
safety tab removed.
Safety Tab
If the safety tab is removed and you want to record over it,
simply cover the hole with vinyl tape.
Tape Speeds
SP(Standard Play)
Gives the best quality recording, but
fewer programs can be recorded on
the tape. Special effects such as
pause, slow motion, picture search,
and frame advance work well when
you play back tapes recorded in
this speed.
SLP(Super Long Play)
Gives approximately three times the
recording time of tapes recorde d in
SP.Special effects such as pause, slow
motion, picture search, and frame
advance work well when you play
back tapes recorded in this speed.
Approximate Recording Times:
Cassette SP SLP
T-120 2 Hr 6 Hr
T-160 2 Hr/40 Min 8 Hr
28
To Next Page
Loading...
Need help?
General
