To Next Page

To Previous Page

THE BCDC1225

The BCDC1225 In-vehicle Battery Charger features technology designed to charge your batteries

to 100%, regardless of their type or size. By providing a unique charging proﬁ le to each speciﬁ c

battery type, the BCDC1225 In-Vehicle Battery Charger is able to achieve and maintain an optimal

charge in your auxiliary battery, at all times.

The BCDC1225 In-vehicle Battery Charger also features a Maximum Power Point Tracking (MPPT)

solar regulator, allowing you to deliver the maximum amount of power from your solar panels to

your auxiliary battery.

WARNING & SAFETY INSTRUCTIONS

This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised

or have been instructed on how to use the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Do NOT disassemble the BCDC1225 - the internal circuitry contains hazardous voltages.

Attempting to service the unit yourself may result in electric shock or ﬁ re and will void the unit

warranty.

Do NOT use the BCDC1225 to charge non-rechargeable batteries. Doing so may result in harm to

the user and/or damage to the BCDC1225. Only use the BCDC1225 for charging Standard Lead

Acid, Calcium content, Gel & AGM type 12V batteries.

All lead acid batteries produce harmful, explosive gases. The Battery should be mounted in a well

ventilated area, as far as possible from any ignition sources. Do NOT smoke when in the vicinity

of the battery under charge.

Battery acid is a harmful substance. Care should be taken when working with lead acid batteries,

if the acid comes into contact with your eyes or skin, immediately wash the affected area with

cold running water and seek medical assistance. Eye protection and gloves should be worn when

handling lead acid batteries.

The BCDC1225 will achieve best results when proper battery maintenance is regularly performed.

This includes but is not limited to checking water and speciﬁ c gravity levels of the battery.

Warning! Check the manufacturers data for your battery and ensure that the ‘Absorption’ voltage

of the proﬁ le you select does not exceed the manufacturers recommended maximum charging

voltage. If the ‘Absorption’ voltage for your battery type is too high, please select another charging

proﬁ le.

SAL.FOR.Instruction Manual.BCDC1225 – DOC388 – Version 2

Redarc BCDC1225 User Manual

Questions and Answers: