Renesas RA Series Quick Start Guide

Renesas RA Family EK-RA2E1 – Quick Start Guide
R11QS0035EG0100 Rev.1.00 Page 19 of 26
Jan.04.21
2. For example, in the Stacks tab of the configurator, the user can click to select modules to modify the
configuration settings, as required, in the Properties tab. The following screen shot illustrates modifying
the ADC driver configuration.
Note: To access the stack component properties, the view must be set to FSP Configuration
perspective, by selecting the View button, which by default will appear at the top right or the IDE.
If not visible, it may be invoked using the Open Perspectives button.
Figure 16. Switch to the FSP Configurator view
Figure 17. Modifying the Configuration Settings

Renesas RA Series Specifications

General

Brand	Renesas
Model	RA Series
Category	Microcontrollers
Language	English