Renesas VUI Reference Solution VOICE-RA4E1 Engineering Manual
VOICE-RA4E1 Engineering Manual Rev.1.0 Page
of 14
June 2022
8. Implementation Details
8.1 QSPI NOR flash
There is one QSPI NOR Flash on board. The device is Dialog AT25SF641B-MHB-T, 64 Mbit (8 Mbyte) in a
8-pad Ultra-Thin DFN (5 x 6 x 0.6mm) package. The QSPI port of RA4E1 is configured as Fast Read Dual
I/O mode on this kit.
Table 4. QSPI Flash Port Assignments
8.2 PMOD
One PMOD type 2A/3A/6A connectors (2x6 pin, dual row, right angle socket) is included. If the RA4E1 SCI0
has been configured as Simple I2C, please insert a jumper on header J16 to route SDA signal to PMOD
connector pin 4 for meet PMOD 6A pin definition.
Table 5. PMOD Port Assignments (J15)
PMOD Type
2A Signal
(SPI)
PMOD Type
3A Signal
(UART)
PMOD Type
6A Signal
(I2C)