Renogy Monitoring Screen User Manual

20
Troubleshooting
If the monitoring screen does not operate when connected to the
battery or the battery bank, please check monitoring screen and
battery side connections. If all the connections are solid, please
check if the battery or the battery bank has been activated. If the
battery or the battery bank cannot be activated using the
monitoring screen, it may have entered protection mode and will
need special attention.
If the information displayed on the monitoring screen is not
accurate, please long press the Page Up Button and the Page
Down Button at the same time for 3 seconds to reset the
monitoring screen.
If the monitoring screen displays no information and resets
frequently, please reactivate the battery or battery bank by using
the Power Button on the monitoring screen.
If the battery or battery bank is charged immediately after high
current discharge, or discharged immediately after high current
charge, the monitoring screen may take a while to calibrate before
it can display accurate state of charge.
If any problems occur during battery operation, please refer to
the following instructions or contact Renogy for assistance:

Renogy Monitoring Screen Specifications

General

Brand	Renogy
Model	Monitoring Screen
Category	Measuring Instruments
Language	English