Reolink Argus Eco User Manual

Reolink Wireless Battery-powered Camera
89
Warm Tips
The Wi-Fi signal strength of wireless cameras can be interfered with by numerous
factors, such as other Wi-Fi networks around, the distance from the router/hot spot,
walls/obstacles in between, transmitting power of the router/extender, etc.
Make sure that the wireless signal is three bars or at least two bars. One bar signal
is too weak to establish a stable connection. If the Wi-Fi signal strength is low/weak,
you may refer to the following guides to improve the Wi-Fi signal strength of the
wireless camera.
·Shorten the distance between your wireless camera and the router.
·Change the wireless channel on your router to avoid interference from Wi-Fi
networks around.
·Keep the wireless camera away from appliances or electronic devices like a
microwave, computer, wireless router, etc.
·Install the wireless camera to somewhere with fewer walls and obstacles in
between with the router.
·Fasten the antennas on the wireless camera.
·Change a router which has higher wireless transmitting power.
·Install a Wi-Fi extender
SD card Storage
Choose a proper SD card
Please choose a SD card with below specification so it can be compatible with the
camera.
Item
Requirement
Capacity
Up to 128GB (Argus 2; Argus 2E; Argus 3; Argus
Pro; Argus Eco; Argus PT; Reolink Go PT with
the latest firmware version)
Read and Write Speed
Class 10 or higher/ ≥26Mbps
Format
FAT32

Reolink Argus Eco Specifications

Video

video resolution	1080p HD at 15 frames/sec
field of view	100° diagonal
night vision range	10 m (33 ft)

PIR Detection & Alerts

PIR detection distance	up to 10 m (33 ft)
PIR detection angle	100° horizontal
audio alert	customized voice-recordable alerts

General

operating temperature range	-10°C to 55°C (14°F to 131°F)
weather resistance	IP65 certified weatherproof
size	71 x 186 mm

Weight and Dimensions

weight	320 g (11.2 oz)
operating frequency	2412MHz—2472MHz
maximum transmitted power	18 dBm