Installation Tips
Mount the Camera to the Wall
• Do not face the camera towards any light sources.
• Do not point the camera towards a glass window. Or, it may result in
poor image performance due to the window glare from infrared LEDs,
ambient lights or status lights.
• Do not place the camera in a shaded area and point it towards a well-lit
area. Or, it may result in poor image performance. For better image
quality, please make sure that the lighting condition for both the camera
and the captured object is the same.
• For better image quality, it’s recommended to clean the lens with a soft
cloth regularly.
• Make sure the power ports are not exposed to water or moisture or
blocked by dirt or other elements.
• Do not install the camera in places where rain and snow may hit the
lens directly.
• The camera may work in extremely cold conditions as low as -25°C as it
will produce heat when powering on. You may power on the camera
indoors for a few minutes before installing it outdoors.
Mount the Camera
EnglishEnglish
Drill holes in accordance with the
mounting hole template.
NOTE: Use the drywall anchors
included in the package if needed.
Install the mount base with screws
included in the package.
NOTE: Run the cable through the
cable notch on the mount base. As
for the WiFi camera, it is
recommended that the antennas
be installed upward or horizontally
for better WiFi connection.
1
2
7 8
To Next Page
Loading...
Need help?
General
Weight and Dimensions
