Part Name Description Picture
Blower
This is a variable speed blower that is
matched to the Dungs gas valve. The
speed and function of the blower is
monitored by the main controller.
Gas Control Valve
The gas valve, by Honeywell, is
matched to the blower motor. Their
functions are controlled by the primary
controller.
Flue Gas Temperature
Sensor – Exhaust
Measures the temperature of the
combustion gases at the discharge
vent of the water heater.
This normally closed switch has a
trip setting of 160
0
F.
Power Anode Controller
The power anode controller controls
the current flowing through each
anode. The anode system is
protecting the tank against corrosion.
The power anodes can be checked
through menu options under
“system” and check “tank health” to
see the power output of the anodes.
The closer to 100% power, the more
bare metal there is in the tank.
Anode controller has LED flash code
indicators to determine if there is
communication between the
controller and anodes. Anodes can be
unplugged if anode or wiring is
damaged.
11
Triton Service Manual SVC1020T ; Rev 4
80 and 100 gallon chassis
Parts
To Next Page
Loading...
Need help?
General
