Rheem Value Series
Upflow/Horizontal Gas Furnace
FORM NO. G11-520 REV. 1
RGPS- Series
80% A.F.U.E.†
Input Rates 50-150 kBTU
• The Rheem Value Series line of upflow/horizontal gas
furnaces are designed for utility rooms, closets, alcoves,
or attics. Because of the model’s low-profile 34 inch
[864 mm] height, the upflow model can also be used to
satisfy most applications that traditionally call for a
horizontal furnace.
• The design is certified by CSA International.
• Unique solid door design leads to quiet operation.
• Patented heat exchanger, constructed of aluminized steel for the
maximum in corrosion resistance and thermal fatigue reliability.
• Low profile “34 inch” [864 mm] design is lighter and easier to
handle, and leaves room for optional equipment.
• Convertible from upflow to horizontal left or right without field
conversion.
• Left or right side gas and electric inlet connections allow
quick and simple change.
• Direct spark ignition with remote sense, features a integrated
board with an electronic air cleaner hookup.
• Prepaint galvanized steel cabinet.
• A slow-open gas valve and a specially designed draft inducer
motor make it one of the quietest furnaces on the market
today.
• Grab-holes in doors to aid in easy door removal and
replacement.
• A variety of cooling coils and plenums designed to use with
Rheem Value Series gas furnaces are available as optional
accessories.
Air
Gas Furnaces
RGPS Series
To Next Page
Need help?
General