Ricoh 920SPF User Manual

Connecting to the Ethernet Interface
This section describes how to connect Ethernet interface cable to the Ethernet interface.
• If the main power switch is on, turn it off.
• Use the following Ethernet cables.
• Unshielded Twisted Pair Cable (UTP) or Shielded Twisted Pair Cable (STP) and Category type
5 or more
1. A ferrite core for the Ethernet interface cable is supplied with this machine. Attach the ferrite
core at the machine end of the Ethernet cable
BKR010S
2. Make sure the main power switch of the machine is off.
3. Connect the Ethernet interface cable to the 10BASE-T/100BASE-TX port.
BKR006S
4. Connect the other end of the Ethernet interface cable to a network connection device such
as a hub.
2. Connecting the Machine
62
2

Ricoh 920SPF Specifications

General

Printer Type	Laser
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Automatic Document Feeder (ADF)	Yes
ADF Capacity	100 sheets
Fax Speed	33.6 Kbps
Hard Drive	320 GB
Functions	Fax
Scan Resolution	600 dpi
Connectivity	USB, Ethernet
Operating System Compatibility	Windows