List of the Setting Items
151
6
Settings that can be used with PostScript 3
The following PostScript 3 settings can be used with the machine:
Note
❒ Depending on a type of printer drivers, different items may be displayed.
Settings Selectable Items
Collate: Off, On
Dithering: Auto, Photographic, Text, User Setting
Duplex: Off, Open to Left, Open to Top
Fit to Print Size: Prompt User, Nearest Size and Scale, Nearest Size and Crop
Image Smoothing: Off, On, Auto, Less than 90 ppi, Less than 150 ppi, Less than
200 ppi, Less than300 ppi
Input Tray: AutoSelect Tray, Bypass Tray, Tray 1, Tray 2, Tray 3, Tray 4
Output Tray: Printer Default, Internal Tray 1, InternalTray 2, Internal Shift
Tray, Finisher SR3000 Upper Tray, Finisher SR3010 Shift Tray,
Finisher SR3000Shift Tray, Finisher SR3000 Booklet Tray, Fin-
isher SR790 Upper Tray, Finisher SR790 Shift Tray
Resolution 600 dpi
Size: See General Setting Guide.
Staple: Off, Top Left, Top Right, 2 at Left, 2 at Right, 2 at Top, 2 at Cent-
er
Toner Saving On, Off
Type: See General Setting Guide.
Paper Selection Same Paper for All Pages, Different Paper for First Page, Use
Slip Sheet, Chaptering
Punch: Off, 2 at Left, 2 at Right, 2 at Top, 3 at Left, 3 at Right, 3 at Top,
4 at Left, 4 at Right, 4 at Top
To Next Page
Loading...
Need help?
General