User Authentication
57
2
P Enter the unique attribute and then press [OK].
Note
❒ Specify Unique Attribute on the machine to match the user information in
the LDAP server with that in the machine. By doing this, if the Unique At-
tribute of a user registered in the LDAP server matches that of a user reg-
istered in the machine, the two instances are treated as referring to the
same user.You can enter an attribute such as "serialNumber" or "uid". Ad-
ditionally, you can enter "cn" or "employeeNumber", provided it is unique.
If you do not specify the Unique Attribute, an account with the same user
information but with a different login user name will be created in the ma-
chine.
Q Press [OK].
R Press the {User Tools/Counter} key.
Integration Server Authentication
To use Integration Server Authentication, you need a server on which ScanRout-
er software that supports authentication is installed.
For external authentication, the Integration Server Authentication collectively
authenticates users accessing the server over the network, providing a server-in-
dependent centralized user authentication system that is safe and convenient.
For example, if the delivery server and the machine share the same Integration
Server Authentication, single sign-on is possible using DeskTopBinder.
To use [Integration Svr. Auth.], the machine must have access to a server on which
ScanRouter System or Web SmartDeviceMonitor software and [Authentication
Manager] are installed.
For details about the software, contact your local dealer.
Using Web Image Monitor, you can specify whether or not to check the reliabil-
ity of the SSL server being connected to.
For details see the Web Image Monitor Help.
ApollonC1-GB_Sec_F_FM_forPaper.book Page 57 Thursday, March 30, 2006 12:47 PM
To Next Page
Loading...
Need help?
General
