Authentication and its Application
66
2
If User Authentication is Specified
When user authentication (User Code Authentication, Basic Authentication,
Windows Authentication, LDAP Authentication, or Integration Server Authen-
tication) is set, the authentication screen is displayed. Unless a valid user name
and password are entered, operations are not possible with the machine. Log on
to operate the machine, and log off when you are finished operations. Be sure to
log off to prevent unauthorized users from using the machine.When auto logout
timer is specified, the machine automatically logs you off if you do not use the
control panel within a given time. Additionally, you can authenticate using an
external device. For details, see p.71 “Authentication using an external device”.
Note
❒ Consult the User Administrator about your login user name, password, and
user code.
❒ For user code authentication, enter a number registered in the address book
as [User Code].
User Code Authentication (Using the Control Panel)
When user authentication is set, the following screen appears.
Enter a user code (up to eight digits), and then press the [OK] key.
Note
❒ To log off, do one of the following:
• Press the Operation switch.
• Press the {User Tools/Counter} key, press [System Settings], and then press
the {User Tools/Counter} key again.
• Press the {Energy Saver} key after jobs are completed.
User Code Authentication (Using a Printer Driver)
When user authentication is set, specify the user code in the printer properties
of a printer driver. For details, see the printer driver Help.
ApollonC1-GB_Sec_F_FM_forPaper.book Page 66 Thursday, March 30, 2006 12:47 PM
To Next Page
Loading...
Need help?
General
