Aficio SP3400n/3410dn Service Guidelines 25/02/2010
7. INSTALLATION
7.1 GENERAL
The SP3400n/3410dn are designed as end user installable products.
7.2 MINIMUM SPACE REQUIREMENTS
Place the printer near the power source providing clearance as shown below.
A: Over 20 cm
B Over 20 cm
C Over 10 cm
D Over 70 cm
7.3 INSTALLATION TIME
The following times are given as a guideline for experienced technicians after unpacking.
PERIPHERALS INSTALLATION TIME (MINUTES)
Mainframe 30
Paper feed unit 5
7.4 METER CHARGE SETTINGS AT INSTALLATION
If you wish to sell the machine on a cost per print basis the counter can be obtained by
pressing:
To be confirmed: User Tools > Reports Print > OK > Configuration Page > OK
13
To Next Page
Loading...
Need help?
General