53
A Variety of Shooting Techniques/Playback
Using Natural and Artificial Lighting
(WHITE BALANCE)
Adjust the white balance so that a white subject may be reproduced as white.
At purchase, the White Balance is set to "AUTO"; normally you do not need to
change the setting, but if the camera is having difficulty determining the white
balance when shooting an object of a single color or under several light
sources, you can change the setting.
1. Turn the Mode Selector to
5
55
5
.
2. Press the ADJ. Button three times.
The White Balance menu appears.
3. Press the !"
!"!"
!" buttons to select a mode other than .
You can also press the shutter button in this state.
4. Press the O
OO
O button.
White Balance settings are completed
and the symbol appears on the screen.
This setting will be used for shooting
until you change it.
Types of Modes You Can Select
Symbol Mode Description
AUTO Auto Make adjustments automatically.
Daylight Select when shooting outdoors (Sunny) and White Balance fails to
adjust properly.
Overcast Select when shooting in cloudy weather or shade and the White
Balance fails to adjust properly.
Tungsten light Select when shooting under tungsten light and White Balance fails to
adjust properly.
Fluorescent light Select when shooting under fluorescent light and White Balance fails
to adjust properly.
One-push Manually set White Balance.
To change the setting, use either the Shooting Setting menu or the ADJ. button.
This section explains easy ways with the ADJ. button.
When using the Shooting Setting menu, see "Using the Shooting Setting Menu" ( P.51).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
