Technical Bulletin PAGE: 8/9
Reissued: 05-Jan-16
Model: MET-C1ab_SOP/ MET-C1cde_SOP/ MET-C1yz_SOP/
Cor-C1_SOP/OR-C2_SOP/Z-C2_SOP
Modified Points or Symptom Corrected
3. An error dialog is displayed and login is not possible if the user tries the login without a
user name.
Other changes:
1. Web application API V1.01
2. Supports business sineage apps for the Smart Operation Panel.
1. Garbled Chinese characters
2. Data-in LED turns is ON when the machine enters Energy Saver mode following a
machine reboot.
3. Data-in LED turns ON when the engine reaches off status if the machine is rebooted
(turned OFF/ON) during a job.
4. The machine does not recover from Energy Saver mode.
5. Translation errors in Russian.
6. Job Stop screen is not displayed when the Stop key is pressed while the user is logged
out of Simple Copy mode.
7. The previous screen appears if the user logs out from the 'linkage failed' screen.
8. Display does not return to Home screen if the Home button is pressed right after the Job
History tab is pressed.
9. Wording errors in several languages were corrected (Cloud FAX).
10. Stop key does not respond while the user is logged out.
11. LUI is displayed when a system reset is performed after completing import/export.
12. Display does not return to the Home screen if the Home key is pressed after the machine
recovers from Sleep mode.
Added support for using external tools to install applications on the Smart Operation Panel.
1. Duplicates of the Printer, Scanner, and FAX icons appear when the main power is turned
OFF/ON after the display language is changed.
Other changes:
2. The machine hard disk can now be used by applications displayed on the Smart
Operation Panel.
IMPORTANT: To apply this change, update the System/Copy firmware to v3.00
(D1485550K/D1465550L) or later.
Symptom corrected:
The Smart Operation Panel unit does not reach the Ready condition.
Other changes:
Some words in Portuguese have been revised in accordance with new spelling changes
made to the Portuguese language.
1. The application icon does not respond after the machine reboots automatically after an
SC.
2. The beep sound can still be heard even when the Warm-up Beeper setting (User Tools) is
turned OFF.
Important:
To Next Page
Loading...
