Ricoh MP C4503 - Page 88

Technical Bulletin PAGE: 1/3
Reissued: 22-Dec-16
Model: MET-C1ab_SOP
Date: 01-Aug-13
No.: RD147034p
RTB Reissue
The items in bold italics have been corrected or added.
Subject: Firmware Release Note: Network Support
Prepared by: E. Hinata
From: 1st Tech Service Sect., MFP/Printer Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other (Firmware)
Action required
Service manual revision
Retrofit information
Tier 2
Important Information about Normal/Smart Panel Firmware Updates
 When updating machine firmware, make sure NOT to install Smart Panel supported
firmware on a machine with a normal operation panel (and vice-versa). If you do, the
machine may not function as designed and product warranty may not apply.
 To avoid this, when updating the firmware, make sure that the numbers next to "NEW" and
"ROM" are the same on the operation panel.
 If you install the wrong firmware, repeat the update procedure and check the numbers
mentioned above.
This RTB has been issued to announce the firmware release information for the Network
Support.
Version
Program No.
Effective Date
Availability of RFU
12.96
D1465567S
January 2017 production
Available
12.95
D1465567R
October 2016 production
Available
12.94
D1465567Q
April 2016 production
Available
12.93
D1465567P
September 2015 production
Available
12.92
D1465567N
June 2015 production
Available
12.91
D1465567M
April 2015 production
Available
12.90
D1465567L
December 2014 production
Available
12.89
D1465567K
October 2014 production
Available
12.88
D1465567J
August 2014 production
Available
12.85
D1465567H
March 2014 production
Available
12.84.2
D1465567G
January 2014 production
Available
12.72.7
D1465567F
December 2013 production
Available
12.72.6
D1465567E
November 2013 production
Available
12.72.5
D1465567D
September 2013 production
Available
12.72.4
D1465567C
August 2013 production
Available
12.72.3
D1465567B
1st Mass production
Available
Note: Definition of Availability of RFU via @Remote
“Available”: The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Version
Modified Points or Symptom Corrected
12.96
Symptom corrected:
When the device is set to use "IEEE 802.1X" and "TLS1.2" is set to "active",
authentication will fail.