Do not obstruct the machine's vents. Doing so risks fire caused by over-•
heated internal components.
Machine sound levels exceeding [Sound Power Level (Black and White)] > •
63 dB(A) are not suitable for desk work environments, so place the ma-
chine in another room.
Keep the machine away from salt-bearing air and corrosive gases. Also, do •
not install the machine in places where chemical reactions are likely (labo-
ratories, etc.), as doing so will cause the machine to malfunction.
Handling Power Cords and Power Plugs
WARNING: R
Do not use any power sources other than those that match the speci-•
fications shown in this manual. Doing so could result in fire or electric
shock.
Do not use any frequencies other than those that match the specifica-•
tions shown. Doing so could result in fire or electric shock.
Do not use multi-socket adaptors. Doing so could result in fire or •
electric shock.
Do not use extension cords. Doing so could result in fire or electric •
shock.
Do not use power cords that are damaged, broken, or modified. Also, •
do not use power cords that have been trapped under heavy objects,
pulled hard, or bent severely. Doing so could result in fire or electric
shock.
Be sure to disconnect the plug from the wall outlet at least once a •
year.
There are burn marks on the plug.•
The prongs on the plug are deformed.•
If any of the above conditions exist, do not use the plug and consult
your dealer or service representative. Use of the plug could result in
fire or electric shock.
Touching the prongs of the power cable's plug with anything metallic •
constitutes a fire and electric shock hazard.
To Next Page
Loading...
Need help?
General
