Alert Messages (Displayed on the Control Panel)
Message Cause Solution
" (A1) Open Front Cover and
remove the paper."
Open the front cover and
remove the jammed paper
from the paper feed path.
For details, see page 92
"Removing Jammed Paper".
" (A2) Remove misfeed in Trays.
Opn & cls Frt. Cov."
Remove the jammed paper
from the bypass tray. To reset
the error, open the front cover
and then close it.
For details, see page 92
"Removing Jammed Paper".
" (B) Open Front Cover and
remove the paper."
Open the front cover and
remove the jammed paper
from the internal paper feed
path.
For details, see page 92
"Removing Jammed Paper".
" (B) (C) Open Front/Rear Cover
and remove misfeed."
Open the front cover and
remove any jammed paper
from the internal paper feed
path.
For details, see page 92
"Removing Jammed Paper".
" (Y1) Remove misfeed in Tray 2.
Opn & cls Frt. Cov."
Open Tray 2 and remove the
jammed paper. To reset the
error, open the front cover
and then close it.
For details, see page 92
"Removing Jammed Paper".
" (Y2) Remove misfeed in Tray 3.
Opn & cls Frt. Cov."
Open Tray 3 and remove the
jammed paper. To reset the
error, open the front cover
and then close it.
For details, see page 92
"Removing Jammed Paper".
" (Y3) Remove misfeed in Tray 4.
Opn & cls Frt. Cov."
Open Tray 4 and remove the
jammed paper. To reset the
error, open the front cover
and then close it.
For details, see page 92
"Removing Jammed Paper".
" (Z1) Open Rear Cover and
remove misfeed"
Open the rear cover and
remove the jammed paper
from the paper duplex unit.
For details, see page 92
"Removing Jammed Paper".
When Messages Are Displayed
59