4. Remove misfed paper slowly.
5. Close the output cover of the fusing unit.
6. Carefully close the front cover.
• When closing the front cover, push the upper side of the cover firmly. After closing the cover, check
that the error has cleared.
Paper Misfeed Message (Y1), (Y2) or (Y3)
The following messages are displayed according to the tray where the paper is jammed:
• " (Y1)": Tray 2
• " (Y2)": Tray 3
• " (Y3)": Tray 4
• Forcefully removing misfed paper may cause paper to tear and leave scraps of paper in the
printer. This might cause a misfeed and damage the printer.
Removing Jammed Paper
89
To Next Page
Loading...
Need help?
General