Tips for Better Results * Always unload your camera in the shade or in a poorly-lit place, never in direct
sunlight or other bright light.
* When you reach the end of the roll film, Film Advance Lever (13) will tighten and refuse to advance. If this
happens, do not advance Film Advance Lever (13) by force for "just one more shot", otherwise the film will be
torn out of the cartridge.
* Film Rewind Release Button (40) will remain in place once it is pressed, and return automatically to its
original position when Film Advance Lever (13) is advanced.
MULTI-EXPOSURE
Your XR-2s has a
multi-exposure
device which will
give you a lot of
creative fun (Fig. 30).
1. Make the first
picture in the normal
way.
2. Release the lock by
sliding the Multi-
exposure Lock Lever
(28) to the left until
the red dot appears.
(Fig. 31)
3. For the second
exposure, advance
Film Advance
Lever ( 13) while
keep pressing
Multi-exposure
Button (27) firmly
with the other
hand (Fig. 32).
This will set the
shutter for the
second exposure
without advancing
the film and
Exposure Counter
(15).
To Next Page
Loading...
Need help?
General
