Tips for Better Results
* To clear the self-timer setting, turn the lever back to its former position with your finger. (Fig. 37)
* You can set Self-timer Lever (17) firstly and then advance Film Advance Lever (13).
* The camera should be placed on a tripod or other firm support when using self-timer.
* When using a tripod with a long thread length (more than 5 7 mm), be careful not to forcibly screw in the
thread further than the depth of the socket
If you press a shutter release button without batteries in the camera. a mirror will stay up. Therefore.
please do not forget to insert batteries into the camera first.
* Shield the Viewfinder Eyepiece (30) by viewfinder eyepiece blind when using self-timer.
* Please do not try to turn a shutter speed dial while a self-timer is working.
CHANGING LENSES
To mount the lens on the camera
1. Mount the lens by
lining up the red dot
on the lens mount with
the matching dot on
the camera mount
(Fig. 38).
2. Grasp the lens
firmly around the lens
barrel and turn it
clockwise until it
clicks into place. (Fig.
39)
To Next Page
Loading...
Need help?
General
