Rigol DS1052D Service Guide

Chapter 1 Specifications RIGOL
Service Guide for DS1000E, DS1000D Series
1-1
Chapter 1 Specifications
All specifications apply to DS1000E, DS1000D series Oscilloscopes unless noted
otherwise. To meet these specifications, two conditions must first be met:
 The instrument must have been operating continuously for thirty minutes within
the specified operating temperature.
 Do perform the “Self Cal” operation, accessible through the Utility menu, if the
operating temperature changes by more than 5°C.
NOTE: All specifications are guaranteed unless noted “typical”.

Rigol DS1052D Specifications

General

Brand	Rigol
Model	DS1052D
Category	Test Equipment
Language	English