REU-2532FFU Series 7 Rinnai
Water Temperature Control
With an “MC” remote control connected, the hot water control range at the key pad is 96 – 140 °F. The
“BC” and “BSC” key pads allow for adjustments between 96 – 120 °F. The “MCC” key pad allows the
commercial unit to be adjusted from 96 – 180 ° F. This allows the Continuum to be set to comply with
various State codes pertaining to maximum water temperatures allowed for homes, child care centers,
elderly care centers, etc. where the water temperature can not exceed a certain set point.
Over Temperature Control
All Continuum models incorporate a device to prevent the hot water temperature from exceeding the
pre-set temperature by more than 4 °F.
Temperature Locks
With the remote control(s) connected, the pre-set water temperature can only be altered between 96 –
110 °F while water is flowing. Also, if the remote control circuit fails while water is flowing, the unit
defaults back to 100 °F. That prevents inadvertently increasing the temperature to a hazardous level
while someone is in the shower. This is an Anti-Scald feature.
To Next Page
Loading...
Need help?
General
