6 | Linear operation guide: 13562-B 02-19
About your Rinnai Linear gas re
Congratulations on the purchase of your Rinnai Linear gas re. We hope you love
this product as much as we do, and on the off chance that something does go
wrong, or if you need help, we’re only a phone call away.
Infra-red remote receiver window and ignition indicator
Will beep when it receives a signal from the remote and ash green during the ignition process.
Please note: The receiver window position will vary slightly between models and single and
double-sided variants. If in doubt the window is easy to identify as it will appear as a shiny section
between the lips of the re.
Internal Wi-Fi reset
A narrow reset tab sits INSIDE the frame
to reset the Wi-Fi module (p. 15).
Infra-red remote or Wi-Fi control
Use the remote for basic control options or utilise the fully functional Wi-Fi app that allows for
thermostatic control, and timer operation.
• Infra-red remote
The remote emits an infra-red signal. It must be aimed at the receiver window. Normal
operating range is up to 7 m. Please note; range can be affected by the angle at which you are
aiming the remote. Some uorescent lights may interfere with the transmission of the remote
signal—change your operating position if this occurs.
• Rinnai Wi-Fi app
Available from the Apple App store (iPhone) or Google Play (android devices), refer p. 10.
Manual control button
On/Off button—lower left hand side on the INSIDE of the frame.
Control options
Infra-red remote
and Wi-Fi control
To Next Page
Loading...
Need help?
General
