Rinstrum R320 User Manual

Rinstrum - R300 Series Digital Indicator Operator Manual Rev 1.5
Page 10
Key Description
R310
Only
TEST: The <TEST> key on the R310 is used to
initiate a display test.
• Once pressed the display is shown with all
segments clear, then all segments lit and then all
segments clear again before returning to normal
operation.
• On the R320 the equivalent function is available
only when TEST has been assigned to the user
defined <FUNCTION> key. Refer to Testing the
Display page 13.
R320
Only
FUNCTION: The <FUNCTION> key on the R320 is
programmable to suit customer requirements. A label
identifying the special function will be attached. Refer
to Special Functions page 13 for details of the
available functions.
• Long Press: A long press of the <FUNCTION>
key may be used for certain functions depending
on the primary function of the key.
3.3. Stability Considerations
Once a <ZERO>, <TARE> or <PRINT> key is pressed the unit
waits for a stable valid reading before performing the associated
operation. If the weight readings remain unstable or invalid due
to some diagnostic error for longer than 10 seconds, the
operation is cancelled and the STABLE ERROR message is
displayed.

Rinstrum R320 Specifications

General

Brand	Rinstrum
Model	R320
Category	Accessories
Language	English