Roche cobas c User Manual

Roche Diagnostics
Operator’s Manual · Version 1.2 9
cobas c pack opener Unpacking and assembly
Unpacking and assembly
The cobas c pack opener is delivered in a box. If any part was damaged during
transport, inform your supplier or the carrier immediately.
a Unpacking the cobas c pack opener
1 Open the box as indicated.
e Refer to the label on the box.
2 Grasp the unit firmly and remove the unit from the box.
3 Place the unit in an upright position on the bench.
4 Pull off the top foam cushion.
5 Separate the unit from the bottom foam cushion.
6 Pull off the plastic foil and remove the desiccant bag from the unit.
7 Place the unit on a stable, vibration-free surface, for example a bench. Do not
place in direct sunlight. Comply with other environmental requirements.
e Technical data and specifications on page 22
8 Position the unit in a way that its on/off switch and power receptacle can be easily
and quickly accessed whenever needed.
9 Check that the consignment is complete.
CAUTION
Personal injury due to heavy and slippery device
The unit may slip out of your hands.
Always hold the unit firmly.

Roche cobas c Specifications