9
More features
IV:LED indicators
Note: Any questions, you can refer to FAQ rstly.
In addition to some of the settings described above,there are more functions.
Including Virtual Server, DHCP, UPnP, DMZ, DNS and Firewall Security.
Jack/Port/Button
USB
Reset/WPS
LAN 1/2/3/4
WAN
Power
Description
The USB port is used to connect devices that support
USB 3.0, and can also support USB 2.0.
Reset : Keep pressing the Reset button for 8 seconds
to start the Reset, the product will restore factory
settings.
WPS : Keep pressing the WPS button for 3 seconds to
start the WPS, the product can quickly connect to
other devices that support WPS terminals.
The LAN ports can connect wired devices such as
computers or switches.
The WAN port can connect this router to the internet.
The Power port can connect the power.
LED
Power
2.4G
5G
WPS
Description
Solid green:The device is ready.
O:The device does not start or is not powered.
Solid green: 2.4GHz Wi-Fi is connected.
O: 2.4G Wi-Fi is not connected.
Blinking green: 2.4G Wi-Fi is sending or receiving trac.
Solid green: 5GHz Wi-Fi is connected.
O: 5G Wi-Fi is not connected.
Blinking green: 5G Wi-Fi is sending or receiving trac.
Blinking green: WPS is turned on, waiting for terminal
device to access.
O: WPS is turned o.