rock space AX1800 User Manual

I. Connect your router
Hello, welcome to the Rock Space.
Note:
1
If this is the rst time you are using a router or you are not very procient in router settings,
please skip the Step 1 and start from Step 2.
If you are very procient in router settings and know what is the PPPoE user name and password,
you can refer to step 1 to copy them from your original router to AX1800 WiFi router. It will save
you some time.
Step 1: Import your PPPoE user name and password from your original router.
1. Power on your original and new routers.
2. Connect the WAN port of the original router to a LAN port of the new router using an Ethernet
cable.
3. When the WAN and LAN LED indicators of the new router turn solid on for 3 seconds after
blinking fast, the PPPoE user name and password are imported to your new router successfully.
4. Remove the original router.
Note: If the PPPoE user name and password are imported to your new router successfully, this
router will auto-ll the ISP User Name and ISP Password when you select PPPoE connection type.
1. Power on the new router.
2. Connect the WAN port of the new router to the LAN port of your modem or the Ethernet jack
using an Ethernet cable. The WAN LED indicator lights on.
Step 2: Connect your new router to the internet.
Ethernet cable
Power
Power
New router
LAN
Original router
WAN
Modem
LAN
Internet
Or
Ethernet cable
Power
Ethernet jack
WAN

rock space AX1800 Specifications

General

Brand	rock space
Model	AX1800
Category	Wireless Router
Language	English