8
Description of external components
1. Steam valve handle. Turn left to open steam; turn right to shut.
2. Steam wand. Can become hot and cause burns. Caution!
3. Boiler pressure gauge. Boiler pressure should be around 1 Bar.
4. Machine’s on/off switch. Position “0” = off; position “1” = on.
5. Control lamp ”machine on” when illuminated and water level low when light flashing.
6. Brewing head. It’s very hot and can cause burns! Caution!
7. Filter holder. Its metal parts can become hot and cause burns. Caution!
8. Brewing head’s (or group’s) progressive infusion piston. Unloads hot water into drip tray once brewing process is
terminated. Caution: its metal parts can become very hot and cause serious burns. Attention to hot water
flow coming out beneath after brewing process is terminated!
9. Lever for brewing process control. Caution: its metal parts can become very hot and cause burns!
10. Drip tray and grid.
11. Hot water wand. Can become very hot and cause serious burns. Caution!
12. Hot water handle. Turn left to open. Turn right to shut.
13. Cups frame.
14. Cups tray. Never pour any liquid on this tray! It will filter inside the equipment and can cause electrical
shocks & serious injuries. Danger!
15 . Pump pressure gauge.
1 12
2
3
4
5
6
7
8
9
10
11
14
13
15
To Next Page
Loading...
Need help?
General
