9
Installation
All machines are designed to ensure maximum possible user safety. It is, however, an important responsibility of the
user to observe the following safety codes to further enhance safe installation and operation.
• Always ensure that hazardous packing items such as plastic bags, Styrofoam, nails, etc. are properly disposed of
to prevent accidental injury to children or other persons.
• If there is evidence of defect or damage to the machine an authorised Rocket Espresso Ltd. dealer or technician
should be notified immediately so that remedial action can be taken.
• This machine is safe only when it has been correctly connected to an efficient earthing/grounding system. This
should conform to local safety standards and legislation in force at the time of installation.
• Installation of any Rocket Espresso Ltd. product should only be undertaken by duly authorised, properly trained
and qualified personnel
• Dangerous or improper electrical connections are extremely hazardous and should never occur.
• Always check the integrity of the components elements of the machine.
• Never fit defective or damaged spare parts. Always request replacement from Rocket Espresso Ltd. .
• Before connecting the machine to electric supply, always check that capacity and power rating at least equals the
power requirement of the machine.
• Protect the user by fitting a circuit breaker to electric supply feeding the machine.
• Never attempt to run the machine with water that is harder than 7°F.
This equipment is to be installed to comply with the applicable Federal, state, or local plumbing codes
having jurisdiction.
To Next Page
Loading...
Need help?
General
