Installation Instructions
Original Instructions
Kinetix TLP Multi-purpose Servo Motors
with 046…235 mm Frame Size
Catalog Numbers TLP-A046-005, TLP-A046-010, TLP-A070-020, TLP-A070-040, TLP-A090-075, TLP-A100-100, TLP-A115-100,
TLP-A115-200, TLP-A145-050, TLP-A145-090, TLP-A145-100, TLP-A145-150, TLP-A200-200, TLP-A200-300, TLP-A200-350,
TLP-A200-450, TLP-A200-550, TLP-A200-750, TLP-A235-11K, TLP-A235-15K
About the Kinetix TLP Servo Motors
Kinetix® TLP servo motors, tested and validated for optimal performance with Kinetix 5100 servo drives, are available with or without 24V DC
holding brakes, and a wide-range of other economical and customizable options.
You are responsible for inspecting the equipment before accepting the shipment from the freight company. Check the items you receive against your
purchase order. Notify the carrier of shipping damage or missing items immediately. Store or operate your motor in a clean and dry location within
the Environmental Specifications
on page 15.
Topic Page Topic (continued) Page
About the Kinetix TLP Servo Motors 1 Motor Dimensions (200 and 235 mm frame sizes) 8
Catalog Number Explanation 2 Connector Data 9
Before You Install the Motor 2 Load Force Ratings 10
Motor Installation 4 Environmental Specifications 15
Motor Dimensions (046…100 mm frame sizes) 6 Motor Accessories 15
Motor Dimensions (115 and 145 mm frame sizes) 7 Additional Resources 16
ATTENTION: To avoid personal injury and damage to the motor, do not lift or handle the motor by the motor shaft or on-motor cable (when present). The cap on
the shaft can come loose and cause you to drop the motor. Stress on the on-motor cable can disrupt the power and signal connectivity.
To Next Page
Need help?
General
