8
Performing
Making Sound Settings
Overview
Scene
Controller
Performance Keys Octave keys
Breath controller
Bite controller
Thumb lever
thumb pad
S1/S2 keys
BUILT-IN SPEAKERS
OUTPUT
PHONES
Part 2
Part 3
Part 4
System
System settings
Assign
MIDI control
IFX
CHORUS
REVERB
DELAY
Interface
USB computer
(Audio/MIDI)
MIDI input/output
Bluetooth
(Audio/MIDI)
Assign
MIDI control
Part 1
Tone
Partial 1
EQ
Partial 2
EQ
Partial 3
EQ
Partial 4
EQ
MFX
EQ
Tone
A sound that’s assigned to a part is called a “tone.” A tone consists of four partials. You can edit tone settings such as the oscillator, lter, and eect
(MFX).
Part
You can assign a sound (tone) to each of four parts, and make pan and EQ settings for it. One tone is assigned to each part for performance. There
are four parts, and synthesizer tones can be assigned to parts 1–4. SuperNATURAL tones and drum kit tones can be assigned only to part 1. If a
SuperNATURAL tone or drum kit tone is assigned to part 1, parts 2–4 are not available.
Scene
Settings for all parts, assignment settings, and scene eect settings are saved together as a scene. A scene stores the entire state of performance
settings that you specify, including the settings for each part (tone number, pan, volume, etc.), settings that are common to all parts (reverb, delay,
chorus, etc.), assignments for the controllers, and MIDI control settings.
When performing, it is convenient to save your scene settings in a user bank ahead of time, and then switch between scenes during your
performance. There are 50 scenes x 12 banks, allowing you to save a total of 600 scenes. Up to 12 preset scenes and user scenes can also be
registered as Favorites.
* Detailed settings for tones, parts, and scenes can be controlled from the “Aerophone Pro Editor” app (iOS/Android).
System settings
Here you can make various settings for the Aerophone Pro unit itself.
Assignment settings and MIDI control settings are provided both for the system and for the scene, and the “Assign Source” (p. 14) setting
species which are used.
What is SuperNATURAL sounds?
These are proprietary Roland sounds created using Behavior Modeling Technology, which enables natural and rich expression that was
dicult to achieve on earlier sound generators.
About [SCENE CATEGORY] knob
Use [SCENE CATEGORY] knob to switch between preset scene categories, user scene banks, or favorite scenes. For details on how to edit each
scene, refer to p. 9 and p. 10.
To Next Page
Loading...
Need help?
General
