Playing the AX-Synth
20
Recalling FAVORITE memories
To select the Tones assigned to the FAVORITE memories,
proceed as follows.
(1) Press the FAVORITE [A] or [B] button to select the
bank.
The FAVORITE button you press lights and the display
shows “A -” (bank “A”) or “b -” (bank “B”).
(2) Press one of the eight TONE buttons to select the
desired FAVORITE memory in the currently selected
bank.
You can also use the VARIATION [DEC÷–]/[INC÷+] but-
tons to select the FAVORITE memories sequentially,
which may be handy for live performances.
This procedure does not allow you to change banks
(from “A” to “B” and vice versa), however.
Note: When the “Uar” function is selected (see p. 18), you
can also use the OCTAVE/VARIATION [+]/[–] buttons to select
FAVORITE memories.
Note: To select a “regular” Tone again, press the [A] or [B]
button that lights to switch it off.
AX-Synth_e2 Page 20 Monday, October 12, 2009 3:41 PM
To Next Page
Loading...
Need help?
General
