5
Roland Boutique JX-03 FAQ
Q. What is the range of the delay time setting on Boutique series units?
The delay time range is 20 msec to 700 msec.
Q. When connecting two Boutique series units with an audio cable in chain mode,
how should I set the volume of the units?
When connecting two units via an audio cable, the device whose OUTPUT jack is connected should be set to a
volume of about 11 o’clock; on the device whose INPUT jack is connected, set the volume to the level that you want
to hear.
If you have connected three or more devices, devices other than the farthest-downstream device should be set to
about 11 o’clock so that each device has a consistent volume.
Q. Do the Boutique series units have an analog sound engine?
The sound engine uses cutting-edge modeling technology to simulate analog circuits in DSP.
Q. Do the Boutique series units produce the same sound as the JUPITER-8/JUNO-
106/JX-3P?
ACB (Analog Circuit Behavior) technology is used to reproduce the sound of the JUPITER-8/JUNO-106/JX-3P.
Q. Do the Boutique series units have stereo output?
The output of the synth sound is monaural.
5 JP-08: In Dual mode, the LOWER sound is output from “L” and the UPPER sound is output from “R.”
5 JU-06/JX-03: The output of the chorus is stereo.
Q. What parameters can be saved in a pattern of the Boutique series unit’s step
sequencer?
The following parameters can be saved.
5 On/o of each step
5 Velocity of each step
5 Gate time of each step
5 Pitch of each step
5 Scale
Q. Does the step sequencer of the Boutique series units support velocity?
Yes, it supports velocity.
To enter velocity, set the system setting key velocity to [1] (TOUCH), and enter notes from the K-25M or an external
keyboard.
Q. Can I input a tie in the step sequencer of the Boutique series units?
To Next Page
Loading...
Need help?
General
