Roland BR-800 User Manual

126
Making Settings for USB Functionality
OUT POSITION (Output position)
This specifies which signal of the BR-800 will be output
via USB.
* In Control Surface mode, the signal as it is immediately
after passing through the [REC LEVEL] knob will be
output.
MASTER
The signal as it is immediately after pass-
ing through the [MASTER] fader will be
output.
REC LEV
The signal as it is immediately after pass-
ing through the [REC LEVEL] knob (i.e.,
the signal being recorded on the BR-800)
will be output.
* When “INPUT 1–4” has been set for
INPUT SELECT (p. 37), only the signals
for INPUT 1, 2 will be output.
Parameter/
Value
Explanation
BR800_e.book 126 ページ ２０１０年３月２日 火曜日 午後６時４０分

Roland BR-800 Specifications

General

Brand	Roland
Model	BR-800
Category	Voice Recorder
Language	English