48
Various Settings
You can use the Memory Backup function to store this
setting in internal memory (p. 59).
For some sounds, this may cause distortion.
Dynamics Sound Control does not affect the sound from
the Input jack or the sound of external devices
connected to the MIDI Out connector.
You can change the volume balance of Tones 1 and 2.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2.
Press and hold the [Split] button and use the [–] or
[+] button to select “dbL.”
3.
Release the [Split] button to see the current setting.
The current volume balance is shown.
fig.d-9-3-e.eps_88
4.
Use the [–] [+] buttons to change the setting.
The volume balance will change.
If you want to return to the original volume balance, press
the [–] and [+] buttons simultaneously.
You can use the Memory Backup function to store this
setting in internal memory (p. 59).
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Keyboard Settings
Changing the Volume Balance for Dual
Play (Dual Balance)
Volume of
Tone 1
Volume of
Tone 2
F-110_r_e.book 48 ページ ２００９年６月３０日 火曜日 午後１２時６分
To Next Page
Loading...
Need help?
General
