Roland FP-7 User Manual

115
Various Settings
You can make a variety of performance- and recording-related settings in “Function Mode.”
When playing ensemble with other instruments and in other
such instances, you can match the standard pitch to another
instrument.
The standard pitch generally refers to the pitch of the note
that’s played when you finger the middle A key. For a cleaner
ensemble sound while performing with one or more other
instruments, ensure that each instrument’s standard pitch is in
tune with that of the other instruments. This tuning of all the
instruments to a standard pitch is called “master tune.”
1.
Press the [Function] button.
2.
Press the [Piano] button.
The Tuning screen appears.
fig.d-Tuning.eps
3.
While holding down the [Display] button, use
the [-] [+] buttons to select “Master Tune.”
4.
Use the [-] [+] buttons to change the setting.
When the instrument is shipped from the factory, this is
set to “440.0 Hz.”
Storing the Master Tuning Setting in
Internal Memory
After adjusting the master tuning setting, you can store that
setting to internal memory.
If you’ve stored the master tuning setting, it will be preserved
even when the power is turned off.
5.
While holding down the [Display] button, use
the [-] [+] buttons to select “Backup.”
fig.d-backup.eps
6.
Press the [Display] button.
The following screen appears.
fig-d-TuningBackuup-2.eps
If you decide to cancel the operation, select “Cancel”
and press the [Rec] button.
7.
While holding down the [Display] button, use
the [-] [+] buttons to select “OK.”
fig-d-TuningBackuup-3.eps
8.
Press the [Rec] button.
The master tuning setting will be stored to internal
memory.
Tuning Settings
Matching the Pitch with Other
Instruments (Master Tune)
Setting
415.3 Hz–440.0 Hz–466.2 Hz
FP-7-e.book 115 ページ ２００６年１２月１４日 木曜日 午前１０時５７分

Roland FP-7 Specifications

General

Brand	Roland
Model	FP-7
Category	Musical Instrument
Language	English