Roland GO:KEYS 5 User Manual

5
Turning on/o the power
Turning on the power
1.
Move the [volume] slider all the way down to minimize
the volume.
2.
Press the [
Ā
] (power) switch to turn on the power.
Turning o the power
1.
Move the [volume] slider all the way down to minimize
the volume.
2.
Hold down the [
Ā
] (power) button until the display
shows “POWER OFF”.
Release the button, and the power turns o.
NOTE
Never turn o the power of the GO:KEYS during playback or recording,
or when loading/saving data to or from the USB ash drive.
Making the power automatically turn o after a
time (Auto O)
The power to this unit will be turned o automatically after a
predetermined amount of time has passed since it was last used for
playing music, or its buttons or controls were operated (Auto O
function).
If you do not want the power to be turned o automatically, disengage
the Auto O function.
For details, refer to “Reference Manual” (PDF).
¹
Unsaved data is lost when the power turns o. Before turning the
power o, save the data that you want to keep.
¹
To restore power, turn the power on again.
Selecting the tone
Tone button Category
[piano] button
Ac.Piano
Pop Piano
E.Grand Piano
[e.piano] button
E.Piano1
E.Piano2
[strings] button
Solo Strings
Ensemble Strings
[synth] button
Synth Lead
Synth Brass
Synth Pad/Str
Synth Bellpad
Synth Polykey
Synth FX
Synth Pluck
Synth Bass
Plsating
[other] button Categories not listed above
1.
Press the tone buttons to select a category.
Press the [
Ì
] [
Ê
] buttons to switch between all categories in order.
2.
Turn the dial to select a tone.
3.
When playing in dual or split mode, use the function
buttons to select a part and then select the tone.
You can enjoy playing a wide range of sounds (tones) on this instrument, including piano tones and many others.
The tones are separated into the categories shown below.

Roland GO:KEYS 5 Specifications

General

Brand	Roland
Model	GO:KEYS 5
Category	Electronic Keyboard
Language	English