Bluetooth Pairing
The Bluetooth function is turned on by default. You can pair the instru-
ment with an external Bluetooth device.
The instrument’s Bluetooth Audio name: GO:PIANO88.
The instrument’s Bluetooth MIDI name: GO:PIANO88.
Disable Bluetooth Connection
Press and hold [FUNCTION], then press the key marked [AUDIO] to
disconnect Bluetooth Audio.
Press and hold [FUNCTION], then press the key marked [MIDI] to
disconnect Bluetooth MIDI.
When Bluetooth connection is disabled, you can enable Bluetooth
connection again by pairing.
Bluetooth
11
The Twin Piano function splits the keyboard into two areas with the
same pitch and tone, for the convenience of playing together with a
friend or instructor.
1. Press the [TWIN PIANO] button to turn on the function. The button
LED will be lit. The default split point is E3 (32).
2. The upper tone selected before entering Twin Piano will become
the default tone for both areas. You can press one of the [TONE]
buttons to select a desired tone.
3. Press the [TWIN PIANO] button again to turn off the function. The
button LED will turn off.
Notes:
1. Twin Piano function is not available in Demo mode.
2. Dual mode is not available when Twin Piano is in use.
Twin Piano
Press and hold [FUNCTION], then press a key [C2] ~ [D#3] to assign the
MIDI Out channel. Please refer to List of Operations (Button + Key) for
details.
MIDI Out
C
M
Y
CM
MY
CY
CMY
K
Roland_GOPIANO88_Manual_G05_181019.ai 11 2018-10-19 16:54:39Roland_GOPIANO88_Manual_G05_181019.ai 11 2018-10-19 16:54:39
To Next Page
Loading...
Need help?
General
