121
Creating a Multitimbre
Creating a Multitimbre
Changing the Settings of the
Patch Assigned to a Part
When using patches in Multitimbre mode, some settings such as
effects settings will be affected by multitimbre settings. If you wish
to edit a patch while hearing how it will sound in the multitimbre,
use this procedure:
* Here we explain how to change the setting of a patch assigned to a part.
The procedure for changing the settings of rhythm sets is the same.
Substitute “rhythm set” wherever “patch” appears in a sentence.
1. Make sure the MULTITIMBRE PLAY screen is displayed.
2. Move the cursor to the part list, and press or to
select the part whose assigned patch you want to change.
3. Press [MENU].
The Menu window appears.
fig.08-01_50
4. Press or to select a “Part Patch Edit,” and then
press [8 (Select)].
The Patch Edit screen will appear for the patch that is assigned
to the part you selected in step 2.
fig.06-15_50
5. If you want to make settings for a different part, press [4
(Part Select)], and select it in the Part Select window that
appears.
fig.06-16_50
6. The rest of the procedure is the same as when making
changes in Patch mode (p. 42).
To Next Page
Loading...
Need help?
General
