19
Performing with the Keyboard
The RD-300SX provides 340 types of Tones.
Each one of these individual sounds is called a tone.
Tones are assigned to the TONE SELECT buttons according to the tone category
selected.
Try selecting and performing with a number of different tones.
fig.01-06
1
Press ONE TOUCH [PIANO].
This selects a single tone to be played over the entire keyboard.
2
Press any of the TONE SELECT buttons to select the tone category.
3
Press [INC] or [DEC] to select the tone.
The TONE SELECT button for the selected category lights.
Performing with a Variety of Tones
For more on the RD-300SX’s
internal tones, refer to the
“Tone List” (p. 60).
2
1
3
Tones selected with [RHY/
GM2] are registered in the
following order: “Rhythm
Sets,” “GM2 Rhythm Sets,”
and “GM2 Tones.” Refer to the
“Rhythm Set List” (p. 62).
RD-300SX_e.book 19 ページ ２００５年４月２０日 水曜日 午後３時４０分
To Next Page
Loading...
Need help?
General
