76
Detailed Settings for Each Function ([EDIT])
Edit Mode
Changing the PART LEVEL Slider
Feet Assignments (Harmonic Bar)
You can change the Feet assigned to each of the PART
LEVEL sliders used in Tone Wheel mode.
1.
Press [EDIT], getting the indicator to light.
The Edit Menu screen appears.
fig.05-11
2.
Press CURSOR [ ]/[ ] to select “2.Control/EQ.”
3.
Press CURSOR [ ] to display the Edit page.
fig.05-12
fig.05-12
4.
Press CURSOR [ ] [ ] [ ] [ ] to move the
cursor to the parameter for changing the Feet.
“LED ON” and “LED OFF” in the screen indicate
whether PART SWITCH is switched on or off.
5.
Press [INC/YES] or [DEC/NO] to select the Feet.
6.
When you have finished making the settings, press
[EDIT], extinguishing its indicator.
You are returned to the Tone screen.
Setting the Multi-Effects,
Reverb, and Chorus Effects
(MFX/Reverb/Chorus)
The RD-700 contains three effects processors: multi-effects,
chorus, and reverb. Settings can be made separately for each
effects processor.
How to Make Settings
1.
Press [EDIT], getting the indicator to light.
The Edit Menu screen appears.
fig.Editmenu1.eps_150
2.
Press CURSOR [ ]/[ ] to select “3.MFX/Reverb/
Chorus.”
3.
Press CURSOR [ ] to display the Edit screen.
fig.mfx1.eps_150
fig.mfx2.eps_150
“CHORUS” Settings Screen
fig.mfx3-1.eps_150
“DELAY” Settings Screen
fig.mfx3-2.eps_150
Parameter
Value
RHY
16’, 5-1/3’, 8’, 4’, 2-2/3, 2’, 1-3/5’, 1-1/3’, 1’
LWR
UP2
UP1
8'16' 5 1/3' 2'4' 2 2/3' 1'1 3/5'
1 1/3'
Feet Assignments in the Tone Wheel Screen
RD-700_e.book 76 ページ ２００４年４月２６日 月曜日 午前１１時５４分
To Next Page
Loading...
Need help?
General
