Roland TR-626 User Manual

Storing Rhythm Patterns in External Mem
A memory card has a Protect Switch to protect stored data. Normally
this switch should be set lo ON. However, in order to store data with
the memory card, or to change the pitch and level of drum voices the
Protect Switch must be turned OFF before doing these operations.
Turn a memory card's Protect Switch on and off in the play mode.
I
.
,
.J~::>310cld
9'
OFF -ON
If you attempt to memorize data while the Protect Switch is on, the
following will appear in the Display :
If you attempt to turn the Protect Switch ON in write mode, the TR
-626 will slop and then go into the play mode.
* Be especially careful when turning the Protect Switch ON. Bank track
data will be damaged if the Protect Switch is turned on in track write
mode.
Any operation done with a memory care\ should be done when the
TR-626 in track play mode, and is stopped.
65

Roland TR-626 Specifications

General

Brand	Roland
Model	TR-626
Category	Recording Equipment
Language	English