Page 23
06/01
Enrolling Primary & Secondary Codes
Primary Codes
Secondary Codes
Enrolling Primary and Secondary Codes
- Primary Codes can only be enrolled to an empty User Slot, i.e a
slot where there is no existing Primary Code.
- Primary Codes must be unique, i.e. one users Primary Code
may not be the same as another users Primary Code.
- Primary Codes cannot be the same as any system codes, such
as the Normal / Secure Code or Open Code.
- Users who hold a Primary Code can gain entry only during
Normal Mode.
- Secondary Codes can only be enrolled to User Slot that already
has a Primary Code enrolled but no Secondary Code.
- Secondary Codes do not have to be unique, i.e. multiple users
can all hold the same Secondary Code.
- Secondary Codes cannot be the same as any system codes,
such as the Normal / Secure Code or Open Code.
- Users who hold Secondary Codes can gain entry in any Mode
of Operation.
There are two methods to enroll Primary and Secondary
codes, the Standard Method and the Code Search Method.
A. The Standard Method is mainly used when the User Slot
number for the user you wish to program is known. You can
program both Primary and Secondary Codes using the
Standard method. (See Enrolling Users with the Standard
Method on Page 24)
B. The Code Search Method is mainly used when enrolling a
users Secondary Code and the User Slot Code is unknown.
The Code Search method only works if a users Primary Code
is already enrolled but the Secondary Code is not. (See
Enrolling Users with the Code Search Method on Page 25)
AC-C31
Setting Fail Safe/Secure Operation
Setting Tamper Siren Time
Setting the Lock Strike Release Time
1)
2) "6" Menu 6
3)
"0"
"1"
4)
Enter Programming Mode
Press to enter
The Mode LED will flash green
Construct the 4-digit code
using the instructions below:
For Fail Secure Operation the first
digit should be
For Fail Safe Operation the first
digit should be
Tamper Siren Time, enter any
number from 1 to 9 minutes.
Enter the number of seconds from
(1 to 99 seconds) that you want
the Lock Strike to be released.
For example0512means Fail Secure Operation, with a 5
minute Tamper Siren Time, and a 12 second Lock Strike release
time.
System returns to Normal Mode
You will hear three beeps
The Door LED will turn off.
The Mode LED will turn green
!
!
!
!
First Digit
Second Digit
Third and Fourth Digit
Page 22
06/01
AC-C31
Mode Door
GREEN
Mode Door
GREEN
Mode Door
GREEN
GREEN
?
?
?
?
To Next Page
Loading...
Need help?
General
