Technical Specifications
Fiber Optic Notes:
1.
Maximum segment length is greatly dependent on factors such as fiber quality,
and number of patches and splices. Please consult RuggedCom sales
associates when determining maximum segment distances.
2. All cabling is duplex type unless otherwise specified.
3. All optical power numbers are listed as dBm averages.
4. These transceivers utilize a distributed feedback (DFB) type laser and are rated
for -20C to +85C operation only.
5. The 25-10-0108 SFP module is obsolete, and has been replaced with the 70 km
25-10-0109 SFP module.
RuggedCom
®
32 RuggedSwitch
®
RSG2100
To Next Page
Loading...
Need help?
General
