To Next Page

To Previous Page

CONTROLS AND DISPLAY

CONTROLS

hr, min

Used to set the time (hours and minutes)

Used to select the coee strength. For Grind & Brew mode the options are:

normal

medium

bbb

strong. Default value is

bb. For pre-ground coee mode the options are OFF or ON.

Number of cups that are being brewed (Grind & Brew mode only). Selects the amount of coee which will be ground based on the

amount of water in the reservoir. Options: 2, 4, 6, 8 and 10. Default values is 8.

Used to set up the timer.

Mode select. This button selects Grind & Brew mode (display will show

), or pre-ground coee mode (display will show

Starts the brewing process.

Initiates self clean mode.

DISPLAY ICONS

b, bb, bbb

Shows the currently selected coee strength. For Grind & Brew mode the display shows:

normal

medium

bbb

strong. For

pre-ground coee mode if the strength mode is set to OFF no

icon will be shown. If the strength mode is set to ON the display

will show

2, 4, 6, 8 or 10

Shows the currently selected number of cups being brewed (Grind & Brew mode only).

Grind & Brew mode selected.

Pre-ground coee mode selected.

CLE

The machine needs cleaning. Use the self clean function.

OPERATING MODES

Your coee maker has two operating modes.

GRIND & BREW MODE

This mode uses fresh coee beans to make the coee.

PREGROUND COFFEE MODE

This mode uses pre-ground coee added directly to the lter to make the coee.

USING GRIND & BREW MODE

The quality and avour of your coee is determined by the type of beans, the grind size and the brewing time. We recommend experimenting with the

grind size and coee strength button until you nd the settings that work best for you.

1. To select Grind & Brew mode, press the

button until the

icon shows on the display.

2. Fill the reservoir with the required amount of water. Note that during the brewing cycle, ALL of water you put in the reservoir will be used.

3. Open the lter compartment and place a #4 paper lter into the lter holder. Close the compartment.

4. Open the coee bean hopper lid and ll it with fresh coee beans. Don’t overll the hopper so that you can’t ret the lid. The lid seal will help to

keep the coee beans fresh between uses.

5. Turn the grind control to the required setting (l ne,

medium and l coarse).

6. Press the

button to select the number of cups you are brewing. The setting you choose will depend on how much water you have added to the

reservoir. For example, if you have lled the reservoir to the 6 cups mark, set the number of cups to 6 as well. The default setting is 8.

7. Select the desired coee strength using the

button. The default setting is

8. Press the + button to start brewing. After a short time, the grinder will operate and the light around the button will ash while the coee is brewing.

9. Once the coee is brewed, the light will stop ashing.

USING PREGROUND COFFEE MODE

1. To select pre-ground coee mode, press the

button until the

icon shows on the display.

2. Fill the reservoir with the required amount of water. Note that during the brewing cycle, ALL of water you put in the reservoir will be used.

3. Open the lter compartment and place a #4 paper lter into the lter holder.

4. For each large cup, add 6g of ground lter coee to the lter.

The amount of ground coee you add will depend on how much water you have

added to the reservoir. For example, if you have lled the reservoir to the 6 cups mark, add 6 measures of ground coee.

5. Close the lter compartment.

6. Select the desired coee strength using the