PRODUCT SPECIFICATIONS
Cordless Line Trimmer / Edge Trimmer
Model
RLT1832X5 / RLT1832LI25 /
OLT1832
Voltage 18 V
No-load speed
Cutting capacity: 25 cm 8,400 min
-1
Cutting capacity: 30 cm 7,800 min
-1
Cutting line diameter 1.6 mm
Vibration level (in accordance with EN 50636-2-91 Annex BB)
Line trimmer Edge trimmer
Rear handle 0.7 m/s
2
0.8 m/s
2
Front handle 0.6 m/s
2
0.6 m/s
2
Uncertainty of measurement
1.5 m/s
2
1.5 m/s
2
Noise emission level (in accordance with EN 50636-2-91 Annex
CC)
Line trimmer Edge trimmer
A-weighted sound pressure level
at the operator’s position
82.4 dB(A) 83.5 dB(A)
Uncertainty of measurement 2.5 dB 2.5 dB
A-weighted sound power level 94.2 dB(A) 94.2 dB(A)
Uncertainty of measurement 1.1 dB 1.1 dB
Weight without battery pack 2.4 kg 2.4 kg
With RAC155
A-weighted sound pressure level
at the operator’s position
L
PA
= 79.2 dB(A)
Uncertainty K
PA
= 3.0 dB
A-weighted sound power level L
WA
= 94.5 dB(A)
Uncertainty K
WA
= 1.9 dB
Vibration level (line/edge trimmer)
Front handle a
h
= 7.4 / 6.9 m/s
2
Rear handle a
h
= 7.5 / 9.8 m/s
2
Uncertainty K = 1.5 m/s
2
BATTERY AND CHARGER
Model RLT1832X5 RLT1832LI25 OLT1832
Battery pack RB18L50A RB18L25A —
Weight 0.75 kg 0.45 kg —
Charger RC18120 RC18115 —
Compatible
battery packs
RB18L13, RB18L26, RB18L15, RB18L15A,
RBL18L15B, RB18L20, RB18L20A, RB18L25,
RB18L25A, RB18L30, RB18L30A, RB18L40,
RB18L40A, RB18L50, RB18L50A, RB18L60,
RB18L60A, RB18L90, RB18L90A
Compatible
chargers
BCS618G, RC18150U, BCL14181H,
BCL14183H, RC18627U, RC18120, RC18150,
*BCL1418IV, RC18115
*The compatible charger is for charging in vehicles with 12 V DC
outlets.
REPLACEMENT PART
Spool (3 pcs.) RAC1211
Heavy-duty blades RAC1103
Spool and cap RAC1204
VIBRATION LEVEL
WARNING
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a
preliminary assessment of exposure.
The vibration emission during actual use of power tool
can differ from the declared total value depending on the
ways in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is
running idle in addition to the trigger time.